FAQs
On the new NVR, go to Settings > Network > Network Status. Step 2. Open a compatible browser and input the IP address in the address bar, input the username and password of your NVR, then click Login to live view your device.
How do I access NVR from browser? ›
How can I view the NVR using Chrome or Firefox browser on my Windows PC?
- Enter the IP address of your NVR on the IE Tab's address bar. You may now log in to your device using Chrome.
- After clicking "Allow…", you will be prompted with another message as shown below. ...
- You may now log in to your device.
Can I view my Reolink cameras on my computer? ›
Reolink cameras/NVRs can be accessed locally or remotely via the Reolink App, Client, or web browsers.
How do I connect my Reolink NVR to LAN? ›
Power up the NVR, and plug the LAN port at the back of your NVR into your router with an Ethernet cable to access the internet. Then launch the Reolink App on your phone. Note: Please make sure the device and your phone are on the same network.
How do I access my IP camera through my browser? ›
To access a camera's web interface, type the camera's IP address into a web browser and press Enter. If you're unsure what the camera's IP address is, we recommend following our How to Find Your IP Camera on the Network guide to learn how to download and use the ConfigTool software.
How do I connect my Reolink NVR to my computer? ›
Now, please refer to the following steps to set up your NVR.
- Connect an Ethernet cable from the LAN port of the NVR to the LAN port of your router. ...
- Connect the NVR to a Monitor or TV via the VGA or HDMI cable.
- Connect the camera's RJ45 network socket to any PoE Camera port on the NVR using the Ethernet cables provided.
Can I access Reolink NVR remotely? ›
Refer to Method 1 > Step 2 to remotely access your device on Reolink software, but please select IP/Domain after entering the Add Device page. You may also use the domain name to Remotely Access Reolink Cameras/NVRs on Web Browsers by changing the IP address to the domain name.
How do I access NVR on my laptop? ›
connect the laptop to the same LAN that the NVR LAN port is connected to... then just load the NVR web GUI in the browser on your laptop... For example, it the NVR LAN address is 192.168. 1.10 and your laptop is 192.168. 1.5, then just enter http://192.168.1.10 on the laptop's web browser.
What is the web port for NVR? ›
Use http://WAN-IP-Address:8888 to access your NVR. Note: 1. Due to the default web port of the NVR is port 80, this is the common port for many device, in order to avoid the port conflict, we recommend change the web port of NVR (e.g., 8008, 8888.)
How do I connect my Reolink to my computer? ›
And you need at least one network cable, and a router with PoE capability to complete the setup.
- Use the network cable to connect to the camera and the router.
- Watch the IP camera on the computer.
- Connect the security camera, router and PoE injector.
- Open Reolink Client & add the camera directly.
Reolink software supports Windows, Mac, Android, and iOS. More details are as follows. For Reolink Client: The requirement for Microsoft Windows: Windows 7 and later.
How do I get Reolink on my computer? ›
Install Reolink Client (Windows)
- Applies to: All Reolink Products.
- Download the Reolink Client in Download Center.
- Unzip the installation package and double-click to install the software.
- Click Yes to allow this App to make changes to your device.
Can Reolink NVR work without Internet? ›
Reolink PoE cameras and NVR can work without the internet, but the functions supported may be limited. Please check below. You need to use an Ethernet cable to directly connect your PoE camera to your computer.
Can you access NVR remotely? ›
Setting up your NVR for remote viewing requires you to access your Local Area Network (LAN) from the Internet (a Wide Area Network). Your devices connect to the Internet through your gateway router, which is assigned two different IP addresses – one on the LAN, one on the WAN.
Why won t Reolink connect to NVR? ›
Cause 1: NVR is powered off. Cause 2: There is something wrong with the connection of the LAN port of the NVR. Solution: Please check whether the light on the LAN port is on. If the light is off, please change the cable and port on the router for a try.
How do I find my Reolink NVR IP address? ›
Applies to: All Reolink cameras (except for battery-powered 4G cameras) and NVRs. Log in to your device via Reolink App, and go to Device Settings > Device Info > Network Info to check the network information of your device. Note: For TrackMix Wired LTE, it will gain an IP address only when using cable connection.
What is the default user for Reolink NVR? ›
The default user of Reolink devices is admin, and the default password is blank (no password).