Most Viewed Blogs
- Managed VS Unmanaged Switch: Which is the Best Network Switch?
- Configuring IP Camera on Network: A Step-by-Step Guide for NVR Configuration
- Everything You Should Know About the SFP Module
- How Media Converter Works for CCTV Video and IP Video Surveillance System?
- Future-Proofing Your Retail Network: Key Considerations for Resilience and Reliability
- The Role of DHCP in Efficient IP Address Management
Top Categories
- Fiber Optic Network Switches
- Fiber Optic Media Converters
- VersiVision Analog Video
- VersiVision HD Video
- Video Distribution Amplifiers
- Serial to Fiber Converters
- 2-Wire POTS Phone and Data Kits
- SFP Modules
Security of property and people is important for any commercial and industrial business owner. They are investing in various security solutions, such as IP CCTV cameras and NVR systems to achieve this safety and security. IP CCTV cameras have been described and discussed several times over the years; however, Network Video Recorders (NVR) are understated for various reasons. They are used with IP cameras to enhance the effectiveness of security installations. What makes them popular? How to set up NVR for the IP camera on the network? This post discusses everything you wish to know about NVR camera systems
What is NVR?
A Network Video Recorder (NVR) is a system featuring a software application. This system is designed to collect and store the videos captured by all cameras connected to the network. NVR records these videos on mass storage devices. Unlike other storage devices, it features no specific video capture hardware, and the software is operated on a dedicated device. NVR is usually employed on the IP video surveillance systems, and they are capable of streaming video/audio data on a single cable.
Types of Network Video Recorders
Network video recorders (NVR) are distinguished into two types depending on their powering functions.
- PoE NVR: PoE NVR features PoE ports and is only compatible with cameras with PoE specifications. These cameras are plugged into the PoE port of the NVR. These recorders require no separate adapter. You can connect a CAT 5E/6 cable from the camera to NVR. This will power the camera and support the transmission of data/audio/video over a single cable.
- Non-PoE NVR: These NVRs have no ports for connecting the camera at the back panel. It requires an external power adapter or PoE switch to connect to the network camera. Most non-PoE NVRs feature built-in scan functions that can trace the cameras on the network.
A Brief Introduction to NVR Setup
NVR can be set up with or without a Power over Ethernet (PoE) or Non-PoE switch. PoE switches are used with PoE compatible cameras. The cameras are plugged into the PoE ports of NVR and they require no individual power adapters to function. Non-PoE models feature no ports for plugging for cameras. However, they feature an inbuilt scan function that can scan the camera on the same network. The scan feature is also used by PoE models.
For configuring, the NVR for IP camera on the network using PoE switch, you will require some components and accessories including a power cable, an Ethernet cable, SATA cables, security screw, and a power supply cable for hard drive installation. Most manufacturers provide technical assistance during the connection process or they also supply an easy-to-understand instruction manual with the product and accessories.
NVR is very much similar to digital video recorders (DVR). DVR is mainly used with analog cameras, whereas NVR is used with IP Cameras. It is basically a DVR of an IP camera.
How to Configure NVR for IP Camera with a PoE Switch?
you can find Ethernet Switches for IP surveillance in different configurations. The configuration starts with a hardware setup. Here is how you can proceed with the hardware setup:
- Take the Ethernet cable from the router and connect it at the back of NVR. Ensure that NVR is connected to the Internet.
- Use Ethernet cables to connect the IP cameras to PoE NVR. As the NVR is enabled with the PoE technology, it can easily power the IP cameras.
- Take an HDMI cable or a VGA cable to connect NVR and TV or monitor. Ensure that you use the right input to connect the TV or the monitor— HDMI 1, HDMI 2, or VGA
When these steps are performed properly then NVR and IP camera connection can be easily made. Software setup is the next step in the configuration, and this can be easily done by following the instruction manual provided by the manufacturer.
How to Configure NVR for IP Camera without PoE Switch?
As discussed before, NVR without PoE switch has no Ethernet ports at its back panel. It utilizes an external power adapter or an external PoE switch to power each IP camera. Like NVR with a PoE switch, the configuration of NVR for IP camera without a POE switch also begins with the hardware configuration. Here is how to proceed:
- Take an Ethernet cable to connect the LAN port on the external PoE switch and the router. Then connect the router with the non-PoE NVR.
- Use Ethernet cables to connect all IP cameras to the PoE switch RJ45 ports. The PoE switch will deliver power as well as support video transmission.
- Use an HDMI cable or VGA cable to connect the monitor and the NVR. Always use the right input for making the connection.
Recording will be enabled only when users add the cameras to NVR. This can be easily done by referring to the steps in the instruction manual.
How to Set Up Your IP Camera System with NVR and PoE Switch Efficiently
- Planning Your IP Camera System: Before setting up your IP camera system, it is important to identify your security needs. What areas do you want to monitor? Do you need 24/7 surveillance, or only during specific hours? Once you have answered these questions, you can choose the right IP cameras, NVR, and PoE switch for your system. You should also decide on the number and location of cameras, and calculate power and bandwidth requirements.
- Setting up Your PoE Switch: PoE (Power over Ethernet) switch is an essential component of an IP camera system. It allows you to power and connect multiple IP cameras with just one Ethernet cable. To set up your PoE switch, connect it to the network and configure the switch settings. Test the switch and ensure it works properly.
- Connecting Your IP Cameras to the PoE Switch: Once your PoE switch is set up, you can attach your IP cameras to it. First, connect the cameras to the switch and configure camera settings and IP addresses. Test the cameras and ensure they work properly. You should also consider the placement of the cameras and make sure they capture the areas you want to monitor.
- Connecting Your NVR to the PoE Switch: An NVR (Network Video Recorder) records and stores video from your IP cameras. To connect your NVR to the PoE switch, attach the NVR to the switch and configure NVR settings and network parameters. Test the NVR and ensure it works properly.
- Monitoring and Managing Your IP Camera System: To monitor and manage your IP camera system, you can access it remotely using a computer or mobile device. You can also set up alerts and notifications to notify you when motion is detected or other events occur. It is important to regularly review video footage to ensure the system works properly and identify any security threats.
Important Questions on Setup of NVR with IP Camera Answered
Here is everything you may want to know about the configuration of NVR with IP Camera:
- Why NVR must be connected to the Internet?
NVR when connected to the Internet provides easy remote access of the recordings. It sends alerts or notifications to users regularly and creates backup of the videos on cloud storage solutions. In the absence of the Internet, NVR will record and stream the videos, but they will not be remotely accessible to users.
- What is the maximum transmission distance of the camera from the NVR?
The maximum transmission distance of the Ethernet cable connecting the NVR and an IP camera is 100 meters. This distance limited due to the attenuation of signals. The Ethernet extender is used to extend the transmission distance beyond 100 meters.
- Is it Necessary to Use NVR with Internet?
No, you can use NVR without Internet, too. Most NVRs can be operated as CCTV systems in the absence of the Internet. However, the absence of Internet makes it difficult to view the captured footage off-site.
- Do IP CCTV Cameras Need NVR?
No, IP CCTV cameras do not always need NVR. Many IP CCTV cameras have SD card slots, allowing users to record and store videos.
- Can I add more cameras to NVR?
Yes, you can add more cameras to NVR. If you are using an 8-channel NVR, you can add more cameras to it without buying a new NVR. Depending on your expansion plans, you can buy NVR with 4, 8, 16, 32, 64, and 128 channels.
- How Do I Set Up, Install, and Configure an IP Camera?
To set up an IP camera, choose the right model, mount it securely, connect it to power and your network, access its interface Through a browser, configure settings, and enable remote access if desired. - How to Connect an NVR to the Internet
To connect an NVR to the internet, start by linking it to your local network using an Ethernet cable, then configure its IP address. Next, set up port forwarding on your router and optionally enable Dynamic DNS. Ensure security measures are implemented, such as changing default credentials, and finally, test remote access to confirm the setup.
All the above pointers will help improve your understanding on NVR systems, but that is not enough. You must address several factors while selecting NVR security systems for your applications. First, you need to check the compatibility of NVR security systems with the IP cameras on the network. Next, you need to ensure the NVR camera system supports the camera resolutions because many cannot support 12MP or 4K security cameras. After all these considerations, ensure to use quality PoE switches for the connection. VERSITRON provides PoE media converters and switches in different configurations. PoE switches are one of the most popular products in their collection. You can contact the company’s experts to discuss your requirements for PoE switches for IP CCTV cameras and NVR systems. Versitron provides PoE media converters and switches in different configurations.
Related Product Table
| Model | Function | Connector | Fiber Cable | Wavelength | Max Distance | View Details |
| FDVTR1003A | Transmitter | ST Simplex | MM | 1310nm | 3 Km | |
| FDVTR1005A | Receiver | ST Simplex | MM | 1310nm | 4 Km | |
| FDVTR1A03A | Transmitter | ST Simplex | SM | 1310nm | 5 Km | |
| FDVTR1A05A | Receiver | ST Simplex | SM | 1310nm | 6 Km |
Rich Tull
R.W. Tull is the President of Versitron, a leading technology company specializing in data communication and networking solutions. With expertise in Guiding network switches and media converters, R.W. Tull has played a pivotal role in driving Versitron's success. His deep understanding of these technologies has enabled the company to provide innovative and reliable solutions to clients. As a visionary leader, He ensures that Versitron remains at the forefront of the industry, delivering cutting-edge networking solutions that enhance data communication efficiency.
Related Blogs
-
Why Choose SFP Modules Offered by VERSITRON?
-
How Does a PoE Switch Work?
-
NAS vs Server: Which is Right for You?
-
Everything You Should Know About Ethernet Networks and Media Converters
-
All Important Questions on Voice Over Internet Protocol Answered
-
10 Gigabit Ethernet- Types and Cable Compatibility
-
The Complete Selection Guide of an 8-Port Gigabit Switch
-
HDMI Over Ethernet Technology and It's Importance Discussed
-
Choosing the Right Power Sourcing Equipment for POE Devices
-
Local Networking 101: A Closer Look at Data Link Layer Devices
-
SOHO Networks Unveiled: How to Establish and Configure Yours
-
Switch Security: The Silent Guardian of Your Network
-
How Industrial Metaverse is Transforming Industries?
-
PoE Technology: Driving the Future of IoT Innovation
Back to blog
