How to Initially Set up Reolink WiFi Cameras via Reolink Client (With LAN Port and Without Voice Prompt) (New Client) (2024)

If your Reolink WiFi camera has a LAN port but has no voice prompt, this article will help you initially set it up via Reolink Client.

Applies to: RLC-510WA, RLC-410W, RLC-511W, RLC-511WA, RLC-523WA, RLC-542WA, Reolink Duo WiFi, Reolink Duo 2 WiFi, Reolink Duo Floodlight WiFi.

Note:Before the initial setup, download Reolink Client in the Download Center. For the initial setup, you need to power on the camera with a DC adapter and also connect the camera to your router LAN port with an Ethernet cable, and then follow the steps below to set up your camera. Please make sure that your camera and your PC are on the same network.

Step 1.Launch Reolink Client, and click the “+” icon.

Step 2. Find the camera by scanning the device in LAN, and then click the “+” button.

You may click the refresh button if your camera does not show up immediately.

Step 3. Create a login password for your camera. Then click Next.

Step 4. Name your camera. Then click Finish.

Nowyou could start live viewing your camera.

For modifying the password for the camera, refer to How to Change User Password on the Client.

For Setting up WiFi for this camera, refer to How to Set up WiFi for Battery-Powered and WiFi Cameras via Reolink Client (New Client)