Follow the steps below to manually connect to the CMU-SECURE network.
Step 1: Remove the Existing Wi-Fi Profile
Follow the steps for your OS to remove/forget the existing CMU-SECURE Wi-Fi profile.
Windows 10
- SelectNetwork Settings(Wi-Fi menu).
- SelectManage Wi-Fi Settings.
- Scroll toManage known networks.
- SelectCMU-SECUREand selectForget.
Windows 8
- Click theWi-Fisignal.
- Right-clickCMU-SECUREand selectForget this network.
Windows 7
- Right-click the Wi-Fi signal and selectOpen Network and Sharing Center.
- SelectManage wireless networks.
- Right-clickCMU-SECUREand selectRemove network.
Step 2: Setup the Connection
- Right-click the Wi-Fi signal and selectOpen Network and Sharing Center.
- SelectSet up a new connection or network.
- SelectManually connect to a wireless networkand clickNext.
- Enter the following:
- Network Name:CMU-SECURE
- Security Type:WPA2-ENTERPRISE
- Encryption Type:AES
- ClickNext.
- SelectChange connection settings.
- ClickSecurity.
- VerifyAuthentication MethodisPEAP.
- ClickSettingsand enter the following:
- Verify the server's identity by validating the certificate:checked
- USERTrust RSA Certification Authority or InCommonRSAServerCA:checked
- Authentication Method:EAP-MSCHAP v2
- ClickConfigureanduncheck Automatically use my Windows logon. ClickOK.
- ClickOK.
- ClickAdvanced Settings.
- CheckSpecify authentication modeand selectUser Authentication.
- Do the following:
- Windows 10 - ClickSave credentialsand enter yourAndrew userID and password.ClickOKandCloseto exit.
- Windows 7 & 8 - Click OK and Close to exit. SelectCMU-SECUREfrom the Wi-Fi list and clickConnect. Enter your Andrew userID and password when prompted.