How to Fix High CPU Usage in Linux - Make Tech Easier (2024)

Is your PC freezing? Or have you started hearing loud CPU fan noise coming from your computer? There are many reasons for high CPU utilization in Linux, but the most common is a misbehaving app. Read on to learn how you can fix high CPU usage in Linux.

Also read: How to Undervolt Your CPU With Throttlestop in Windows

1. Find the Culprit

A misbehaving app can bring even the fastest processors to their knees. You can use the System Monitor app or top in the Terminal to find the problematic application.

Open your terminal, type top, and press Enter.

By default, all processes are sorted according to their CPU utilization, with the most CPU-hungry ones at the top. If an app is always in one of the top five slots with a CPU utilization rate significantly higher than the rest, you’ve found the culprit.

2. Renice or Kill the App

Top includes support for both renice and kill. You can use these tools to change the priority of any process or forcefully stop it.

An app’s nice priority refers to the amount of CPU resources it’s allowed to use compared to the other running processes. Nice accepts values from +19 to -20. The higher the number, the lower the priority.

In top, press r and enter the problematic app’s PID. Try changing it to a “+5” value, and if that doesn’t help, retry with “+10,” “+15,” and finally the lowest possible priority, “+19.”

If the app is unresponsive, you should stop it immediately. Press k while in top, enter the PID, press Enter, and the app will be gone.

Also read: How to Cool Down a High CPU Temperature

3. Update Everything

If the problem persists every time you run the app, updating it may fix the issue.

In your terminal, enter:

sudo apt update && sudo apt -y upgrade

After that, try running the problematic application again.

4. Remove and Reinstall the App

If the problem isn’t fixed, there’s a slight chance it appears because of a wrong parameter in the program’s configuration. Resetting it to its original state may help.

First, back up your configuration in case it wasn’t the cause of the problem and you need to restore it later, then purge the problematic app:

sudo apt purge APP_NAMEsudo apt autoremove

See Also

How to Check RAM, GPU, and CPU Usage in Windows 11How do I disable C-States on a Dell server? – Eclipse Systems Knowledge BaseHow to Check Linux CPU Usage or UtilizationSPEC CPU2006 Platform Settings for Sugon Intel-based Systems

Reinstall the app:

sudo apt updatesudo apt install APP_NAME

This will reset the app to its original state.

Also read: 7 Best Apps to View Disk Usage in Linux

5. Revert to the Previous Version

If upgrading the app didn’t solve the problem, you can revert to the previous version instead. Try downgrading and using an older version – at least until the developer has fixed the bugs in the app.

To downgrade your app, first check out the available versions by running your terminal and issuing:

sudo apt policy APP_NAME

Your currently-installed version will have three asterisks next to it. Take note of the other available versions.

Before downgrading, we suggest you purge the existing version to eliminate any configuration-related problems.

Install the older version with:

sudo apt install APP_NAME=VERSION

6. Use Alternative App

The good thing about Linux is that there are many apps that can do the same thing. If one app is causing high CPU usage, you can and should replace it with an alternative.

For example, LibreOffice Writer can be a demanding piece of software, as it relies on many dependencies to run properly. One great alternative to this application is Abiword. To install it in Ubuntu, run the following command:

sudo apt install abiword

Also read: How to Create a .Desktop File for Your Application in Linux

7. Optimize Your System’s Power Settings

Another simple way to fix high CPU usage in Linux is to make sure that your machine can fully utilize its system resources. For the most part, a modern laptop will cap the maximum CPU frequency to conserve its battery, resulting in a slower laptop that constantly peaks in CPU load.

The quickest way to optimize your machine’s power settings is in your system settings menu. To do this in Ubuntu, press Win and type “settings.”

Select the “Power” section from the window’s left side bar.

Select the “Balanced” option under the “Power Mode” category to allow the system to automatically allocate CPU resources whenever you need them.

Reboot your system to ensure that Ubuntu will apply your new settings correctly.

8. Install a Lightweight Desktop Environment

Aside from installing alternative applications and optimizing settings, you can also fix high CPU usage in Linux by installing a better desktop environment. One of the lightest environments for Linux is LXQt.

Unlike GNOME and KDE, the developers of LXQt are dedicated to creating a complete desktop that can run on as few resources as possible. To install LXQt in Ubuntu, run the following command:

sudo apt install lxqt

Log out of your current session and select the gear icon on your login screen to display all of the available desktop environments in your system. Select “LXQt” and log in to your account.

Also read: Top 12 Linux Distros to Pick From in 2024

9. Fix Core Apps Causing High CPU Usage

What happens if what’s eating up your CPU is a core app, like systemd or Xorg?

For systemd, try disabling non-essential features and secondary devices on your computer, such as joypads and printers.

If the device is a joypad, mouse, or keyboard, and you’re running Ubuntu or a compatible distribution, type xinput in your terminal to see all of the connected devices. To disable one of them, use:

xinput --disable DEVICE_ID

To reenable the device, swap disable with enable in the above command.

For other devices, the solution is somewhat more complicated. First, you’ll have to enter lsmod in your terminal and press Enter to see all of the extra drivers your Linux kernel loads as modules. Find the one for the offending device and note down its name, then enter the following:

sudo nano /etc/modprobe.d/blacklist.conf

The document you just opened is a blacklist of modules that shouldn’t load during boot. It will probably already be populated with some entries. Move to the end of the file and follow the same syntax to add your module to this list. Your entry should look like:

blacklist MODULE_NAME

Save the file, reboot, and hopefully, everything will work okay now.

For Xorg, try disabling your Window Manager’s compositor. Although officially the compositor offloads CPU-related tasks to the GPU, that’s not always the case. Sometimes, by enabling compositing support, you’re also enabling many demanding effects.

Sometimes the GPU’s drivers can cause high CPU usage, too. Xorg doesn’t really get along with specific versions of Nvidia’s or AMD’s drivers. The solution is upgrading or downgrading to a different version. Alternatively, you can try open-source versions of your GPU’s drivers. Still, those don’t share the exact feature set and may lack some functionality.

10. Swap Your Kernel

It’s rare for the Linux kernel to be the reason for high CPU utilization. Still, if you’ve reached this point with no solution in sight, you won’t lose anything trying a different one.

As stated on its official site, to install the popular Liquorix kernel in Ubuntu, visit your terminal and type:

sudo add-apt-repository ppa:damentz/liquorix && sudo apt-get update

This will add its repository to Ubuntu’s sources. To bring the kernel itself onboard, use:

sudo apt-get install linux-image-liquorix-amd64 linux-headers-liquorix-amd64

Reboot to enable your new kernel, and, hopefully, your CPU utilization will be back to normal levels.

Also read: 5 Useful Tips When Compiling Your Own Linux Kernel

Frequently Asked Questions

Image credit: Unsplash. All alterations and screenshots by Ramces Red.