Similar to IPv4, IPv6 too supports both static and dynamic routing. Configuration commands for its static routing are similar to IPv4.
Static routing
See Also
What is a default gateway?Modifying the same topology that we used previously, let's add a router, switch, and two PCs to create a separate network, as shown in the following screenshot:
The first network will use addresses starting from 2000:1::/64 and the second network will use addresses starting from 2000:2::/64. The link between both the routers will have IP addresses 2001::10/64 and 2001::20/64.
Here is a table describing the topology:
Device | Interface | IP address |
|---|---|---|
R1 | FastEthernet0/0 |
|
