Contents
- Choosing the correct size cable
- Related Pages
Caution
Electricity is dangerous and can be hazardous. In doubt? Call a qualified electrician.
Choosing the correct size cable
It is important to choose the correct size cable when connecting to the mains. The wire has to be the correct size so that it can cope with the power demands of the device. The size stated for cables is given in mm2 and this measurement is actually the cross sectional area of the wire inside. The larger that area the higher the current it can carry.
If a cable is used which is too small for the amount of current passing through, it becomes dangerous. This results in the wire overheating and causing a serious safety risk. The table below gives typical values of cable size available plus corresponding current rating and maximum power ratings.
| Conductor Size | Current | Maximum power (Watts) |
| 1.0 mm2 | 10 amps | Up to 2400 Watts |
| 1.25 mm2 | 13 amps | Up to 3120 Watts |
| 1.5 mm2 | 15 amps | Up to 3600 Watts |
| 2.5 mm2 | 20 amps | Up to 4800 Watts |
| 4.0 mm2 | 25 amps | Up to 6000 Watts |
Related Pages
Need help or supplies?
Further help required?
Our forum is the perfect place to ask questions and get help. Join us, post your question/comment now!
