What Size Is An M6 Bolt: Dimensions Explained [Size In Inches] (2024)

Table of ContentsHide
  1. What is an M6 Bolt?
  2. How To Measure Metric Bolts?
    1. Diameter
    2. Length
    3. Thread Pitch
  3. Standard References In Using M6 Bolts
    1. Metric Pitch
    2. M6 Bolt Clearance and Tapping Hole
    3. Standard Spanner and Allen Key Sizes
    4. M6 Bolt Maximum Torque Thresholds
    5. M6 Standard Proof Loads
  4. Frequently Asked Questions (FAQs):
  5. Precise Use of M6 Bolts

Nuts and bolts are essential fastenings used to join together machinery, equipment, furniture, and much more. In most circ*mstances, the right bolt size must be used.

We see the usage of nuts and bolts commonly in workshops and construction projects. But today, we will just discuss bolts.

Bolts are threaded fasteners used externally with a nut to hold two pieces of material together. They don’t rotate in the assembly process, but the nut secures it.

The screw is a threaded fastener that passes through the material to form its own thread. You’ll be able to tighten a bolt by applying torque to the head.

Without knowing the right measurements for bolts, you might find it difficult to work on machines and risk damaging them.

To avoid any complications, we will talk about M6 bolts and what their size and specifications are.

Let’s get started!

What is an M6 Bolt?

M6 bolts are used in many applications for the trade and the home. They have a hexagonal head to adjust easily, and they’re available in both full-threaded stems so that they can be used with a nut or in a tapered hole.

The M6 screw is a metric 6mm screw with an outside diameter of 6mm. It has one thread per millimeter. They are often used by HPto mount computer components but can also be found in other devices.

The measurement of M6 bolts is identified by measuring the diameter with a ruler at slightly more than 7/32″ (0.228″).

Compared to the American bolt measurement, when measuring the diameter of screws and bolts, it’s important to measure the distance from the outer thread on one side to the external line on the other side.

This is called the major diameter and will usually be the proper size of the bolt.

How To Measure Metric Bolts?

Suppose you find yourself working with metric bolts for your next project. In that case, you will quickly realize that the part numbers and measurements are in millimeters instead of inches.

What Size Is An M6 Bolt: Dimensions Explained [Size In Inches] (1)


Measuring the diameter of a metric bolt from one end to the other- so easy! The best way to do this is to have a caliper that measures in metric units.

You can use a caliper to clamp around the bolt and adjust it until it fits. It’s great for when you need an exact measurement, like when you’re assembling something!

Read More: Black Decker LHT2240CFF vs LHT2436 Hedge Trimmer


Metric bolts are a really great way to measure the length and save time. Start from the last number in the metric measurement, the bolt head, and measure down to the end of the shank.

Do not include any part of the head in your size.

Thread Pitch

The pitch of a bolt is the distance in millimeters between threads along its length. You can calculate the angle of a bolt in seconds with a free online bolt calculator.

Consider buying a bolt gauge, a device that can help you with this process a bit more quickly!

This is challenging to many, but we’re here to help! You may also watch this video about Measuring Metric Boltsto have a better idea.

Standard References In Using M6 Bolts

For every bolt size, there is a standard performance and procedure. As for M6, bolts have a specific metric pitch, bolt clearance and tapping hole, standard spanner.

Additionally, Allen key sizes, maximum torquethresholds, and standard-proof loads are a requirement.

Each detail is vital, for having at least one error may cost you a project. To avoid any problems, we will cover each one by one.

Metric Pitch

What Size Is An M6 Bolt: Dimensions Explained [Size In Inches] (2)

Wondering what the difference is between pitch and threads per inch? Pitch is the distance between adjacent lines.

Threads per inch are sometimes called pitch because it’s easier to say, but it’s not right—threads per inch are a metric measurement.

Although the ISO standard defines different threads, two are most commonly used in most machinery: standard and fine.

The others are only used in special equipment such as precision instruments, optical instruments, etc.

Pitch refers to a thread’s distance between two adjacent lines. Thread diameter is the outside diameter of a single thread.

Common diameters and pitches are listed in the table.

M6 Bolt Clearance and Tapping Hole

What Size Is An M6 Bolt: Dimensions Explained [Size In Inches] (3)

Metric bolts are made in fractions of their stated size, so a 16mm bolt will fit through a 16mm hole. If you want to make sure your parts line up properly, it is important to drill bolt holes slightly larger.

These are known as clearance holes.

The table provides an overview of the typical clearance hole sizes that are common in most holes. The guide will help you to determine the correct tapping hole size for each type of standard and fine pitch thread.

If you’re using metric threads, it’s easy to work out the tap drill size because it’s just the bolt diameter minus the thread pitch, so a standard pitch M16 bolt has an angle.

Read More: Breaker Bar VS Torque Wrench [What Are The Differences]

Standard Spanner and Allen Key Sizes

What Size Is An M6 Bolt: Dimensions Explained [Size In Inches] (4)

Want to get started with your project quickly and safely? Check out the table below to find out more about the normal range of bolt and nut sizes.

When it comes to working on fasteners, using a ring spanner is the best option.

It’s small enough to fit into tight spaces. It will help you avoid those frustrating moments when a spannerslips and damages the corners of a fastener.

M6 Bolt Maximum Torque Thresholds

What Size Is An M6 Bolt: Dimensions Explained [Size In Inches] (5)

The standard for different bolt sizes and grades is high. Thus, we ensure our tools could handle the weight and the torque needed to tighten your bolts.

Do note that you should only follow the setting shown in the table unless the machine manufacturer has specified otherwise.

Thread is produced by different processes and in various finishes to meet specific needs

The power of the threaded connection is the weakest point. So, if you’re applying torque, make sure it’s screwed into a harder material like aluminum or steel.

If you’re trying to make a thread from a piece of metal, the size of the drilled holemay vary based on how the drill is sharpened and used.

Now you can get a perfect fit every time! The hole might not be precisely straight, and if it’s blunt or worn out, it won’t fit as it should.

Design Engineers must consider all of these factors and may decide that a lower torque is applicable. This is the case in lifting devices where high aspects of safety are required.

M6 Standard Proof Loads

What Size Is An M6 Bolt: Dimensions Explained [Size In Inches] (6)

When you’re trying to decide how much load a bolt should carry, it’s important to understand the “proof load.” The standard for this is typically around 90% of the load the bolt begins to stretch.

In manufacturer’s tables, proof loads are usually given in Newtons, but in this table, we’ve converted them into kg force. The proof load is the maximum load a bolt can carry.

In other terms, the proof load is an applied tensile load that the bolt must support without permanent damage.

To ensure that the bolt returns to its original shape once the load is removed. Manufacturers design their machines so the bolts bear less than the proof load for a good safety factor.

Frequently Asked Questions (FAQs):

What Do Bolt Sizes Mean?

So you need metric bolts, but you don’t know how to read them? No problem! Metric bolts can be measured using the “M” s. In M8-1.0*20, the “M” means the Metric thread designation. Number eight refers to the Nominal diameter (in millimeters), 1.0 refers to its length.

Read More: How to Measure a Bandsaw Blade [Step-By-Step Guide]

Is M6 Bolt Bigger Than M8?

Yes, It is. Metric threads are designated by the number of threads per inch and diameter. The most common metric threading is M6, which has an ISO dimension of 6 x 1 mm.

5mm Allen wrenches or 9/10mm hexagonal wrenches can unscrew nuts and bolts with metric threading.

As for M8bolts, you can find them on the 8mm diameter, but they’re also used in other pitches.

They have an ISO dimension of M8 x 1.25mm. Moreover, you can also use Allen wrenches or hexagonal wrenches to screw or unscrew them.

When should I use fine thread nuts/bolts?

When working with metal, you will need to use fine threaded bolts. For example, when attaching a metal piece to another piece of metal.

Or in the case of fastening a washer and nut together with a threaded bolt.

What Is Bolt Thread Size?

Metric fasteners are different. They use a thread pitch instead of a thread count, the distance between threads expressed in millimeters.

Thread pitch refers to the distance between one thread and the next, and small fasteners have a finer line. A smaller number is actually better, so we use a lower number for our fasteners.

What Is Equivalent To M6?

What Size Is An M6 Bolt: Dimensions Explained [Size In Inches] (7)

Based on this table, M8 bolts are a near equivalent of M6 bolts. Though they might work together in some cases, usually they are not compatible with each other.

Using incompatible bolts might cause faults in machinery when ignored.

Precise Use of M6 Bolts

This article covers the usage of M6 bolts and their size and specifications. Complete with the important details about M6 bolts, Avoid complications in your project!

Feel free to visit this article anytime for a project that requires you to use M6 bolts. Use this as a guide for you to have instructions to look at whenever you’re confused with something.

Remember to keep this guide close to you for future use.

Related Posts:

  • M8 Bolt Size Dimensions [What Does M8 Mean]
  • What Is M10 Bolt Size? [Dimensions Chart]
  • Can You Use A Torque Wrench To Loosen Bolts? [Here Is The…
  • What Is An M8 Screw? Size Mean [Dimensions and Diameter]
  • Lug Nut vs Lug Bolt [Difference You Should Know]
  • How To Cut A Bolt? [Step-By-Step Guide]
  • How To Use A Breaker Bar? [Complete Guide]
  • How To Remove a Broken Bolt from an Engine Block [The Right…
  • Socket Wrench vs Ratchet Wrench [Difference Comparison +…
  • How To Remove A Stripped Hex Head Screw [5 Reasons and…
  • How to Remove a Stripped Lug Nut [Emergency Lug Nut Removal]
What Size Is An M6 Bolt: Dimensions Explained [Size In Inches] (2024)


What size is M6 bolt in inches? ›

You can identify an M6 screw by measuring the diameter with a ruler. It'll be 6 mm, or slightly more than 7/32 inches (0.228″).

Is an M6 bolt 1/4 inch? ›

M6 (1/4")-1.0 x 65 mm (2-9/16") Metric Hex Cap Screws — DIN 933, A2 Stainless Steel, 50/PKG.

What is M6 bolt equivalent? ›

Fastener Conversion Chart
Inch EquivalentMetric Size-PitchISO and IFI Rec.
1/4- 201/4- 28M6x 1
5/16-185/16- 24M8x 1.25
3/8-163/8- 24M10x 1.5
7/16-147/16- 20M12x 1.75
13 more rows

Is M6 a 10MM bolt? ›

M6-1.00 x 10MM Hex Head Cap Screw Bolts, Stainless Steel 18-8 (Quantity: 100 pcs) Fully Threaded, Coarse Thread, Thread Size: M6, Bolt Length: 10MM.

Is an M6 nut 10MM? ›

Dorman AutoGrade Hex Nut, Class 8, Thread Size: M6-1.0 x Hexight: 10mm, Carded.

Are M6 and 1 4 28 the same? ›

The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated "mm"). For nuts, size will appear as diameter and pitch.
Table 3.
MetricClosest Inch
M3.5-0.66-40 (Same)
M4-0.78-36 (Larger)
M5-0.810-32 (Smaller)
M6-1.01/4-28 (Larger)
16 more rows

Is M6 equivalent to 1 4 20? ›

11 more rows

Are M6 and 1 4 the same? ›

6mm equal to 0.2362 inches. Your 6mm spinner will "work" on a 1/4" shaft, but you may have to ream out the hole a little to get it to slide on easily.

What is the size of M6? ›

Metric clearance and tapping drill hole sizes.
SizeClearance Hole mmTapping Drill (std Pitch)
M55.54.2 mm
M66.55.0 mm
M896.75 mm
M10118.5 mm
5 more rows
19 Jun 2020

How do you measure a M6 bolt? ›

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

What size head is an M6 bolt? ›

Common M6 Fastener Screw and Bolt Sizes - MonsterBolts
TypeDINHead Diameter
M6 Hex Bolts (FT)93311.05mm*
M6 Hex Bolts (PT)93111.05mm*
M6 Socket Head Cap91210.22mm
M6 Low Head Socket Cap798410.0mm
4 more rows

How do you measure M bolts? ›

Fastener length is measured from where the material surface is assumed to be, to the end of the fastener. For fasteners where the head usually sits above the surface, the measurement is from directly under the head to the end of the fastener.

What does m5x20 mean? ›

Thread Size: 5 mm. Length: 20 mm .787 inch. Material: Zinc plated, 10.9 Metric Grade.

What do bolt size numbers mean? ›

The size of a metric bolt is specified using pitch, diameter, and length in millimeters. For example, in M8-1.0*20, the “M” means the Metric thread designation, the digit 8 refers to the Nominal diameter (in millimeters), 1.0 refers to the pitch, and 20 refers to the length.

Is an M6 nut 6mm? ›

These right handed metric coarse thread, stainless steel hex nuts are 6mm. They are very popular for marine and construction use.

What does the M mean in bolt sizes? ›

M = This designates the fastener is a metric size. 10 = The nominal diameter in millimeters. 1.0 = The thread pitch, or distance between threads, in millimeters. 20 = The fastener's length, in millimeters.

What size is M6 nut in MM? ›

M6 (6mm) Thread Size. 5mm Nut Thickness (T) +0/-0.3mm Nut Thickness (T) Tolerance.

What size is an M6 hex bolt? ›

The metric designation of an M6 Hex Bolt indicates that its diameter is about 6mm.

What size bolt is 10mm? ›

Steel bolt with M10 metric thread. Metric threads are designated with a capital M plus an indication to their nominal outer diameter and their pitch: This bolt is M10 x 1.5 - which means the outside diameter is 10mm and the threads are 1.5mm apart (the most common thread pitch for M10). Threaded part is 50mm long.

What is the standard pitch for M6? ›

Thread geometry - metric coarse
ThreadMajor diameterPitch
6 more rows

What size is a 5 16 bolt in metric? ›

SAE to Metric Conversion Chart
47 more rows
29 Apr 2020

What is M6 bolt in Imperial? ›

Metric vs Imperial equivalents
Metric (Pitch in mm)British Standard (Threads Per Inch)
SizeCoarse (mm)Size
38 more rows

What is a 1 4 bolt in metric? ›

US to Metric Conversion Table
US (inches)Metric (millimeters)
15 more rows

What size is M8 in inches? ›

Tap sizeBasic major dia (mm)Basic major dia (inch)
M5 x 0.85mm.1969
M6 x 16mm.2362
M8 x 1.258mm.3150
M8 x 18mm.3150
24 more rows

How do you read screw sizes in inches? ›

The first number is the diameter of the screw/bolt in inches and the second is the number of threads per inch.

What does M12 mean on a bolt? ›

The M8 will measure about 8 mm in diameter, more likely, just a touch undersize, (.31496") The M10, about 10 mm in diameter, (.3937") and the M12 about 12 mm in diameter, (.4724"). The "M" designates the bolt is Metric and the number after the M indicates the size. The number after that is the length.

What does M5 mean in bolts? ›

M- Indicates this bolt uses metric threads. 5- Refers to the nominal diameter of the bolt shaft in millimeters. X- Separates the Metric size of the threads and how long the bolt is. 18- This means the threaded part of the bolt is 18mm long.

What does m8 mean? ›

m8 (plural m8s or m8's) (Internet slang, text messaging) Abbreviation of mate.

What size is M5? ›

The M5 screw size has a diameter of 5mm.

How do you classify a bolt size? ›

A bolt's size is classified based on a number of dimensions, namely the bolt's diameter, length of shank, thread pitch, grade, thread length and head size. Bolts can me specified in metric using millimeters, but the standard, internationally-recognized descriptions of bolt sizes are in inches.

How do you read bolt numbers? ›

The number markings are engraved on the top or side of the bolt head. Common metric classes are 5.8, 8.8, 10.9, and 12.9. The higher the numbers are, the stronger the material of the fastener is.

What does M16 bolt mean? ›

Metric bolts are made fractionally under their stated size, for instance an M16 bolt will have a shank diameter of typically 15.97mm.

What size is M6 bolts? ›

M6 Threads

The outside diameter of the threads is 6 mm. The standard metric rack screw is actually an M6 x 1 mm. The number 1 mm refers to 1 threads per millimeter. You can identify an M6 screw by measuring the diameter at slightly more than 7/32″ (0.2362″).

Whats bigger M6 or 1 4? ›

The size of a metric screw or bolt is specified as diameter, pitch and length, in millimeters (millimeters is abbreviated "mm"). For nuts, size will appear as diameter and pitch.
Table 3.
MetricClosest Inch
M6-1.01/4-28 (Larger)
M7-1.01/4-28 (Smaller)
M8-1.255/16-18 (Smaller)
M10-1.53/8-16 (Smaller)
16 more rows

How big is a M6? ›

Metric clearance and tapping drill hole sizes.
SizeClearance Hole mmTapping Drill (fine pitch)
M66.55.25 mm
M897 mm
M10119.0 or 8.75 mm
5 more rows
19 Jun 2020

What is M6 in MM? ›

Spanner and Allen Key Sizes
SizeSpannerAllen Key
M58 mm4 mm
M610 mm5 mm
M813 mm6 mm
M1017 mm8 mm
5 more rows

What head size is M6? ›

DIN 912 Socket Head Cap Screw Dimensions
Size (d1)Thread PitchHead Height (k)
28 more rows

Top Articles
Latest Posts
Article information

Author: Fr. Dewey Fisher

Last Updated:

Views: 6046

Rating: 4.1 / 5 (42 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Fr. Dewey Fisher

Birthday: 1993-03-26

Address: 917 Hyun Views, Rogahnmouth, KY 91013-8827

Phone: +5938540192553

Job: Administration Developer

Hobby: Embroidery, Horseback riding, Juggling, Urban exploration, Skiing, Cycling, Handball

Introduction: My name is Fr. Dewey Fisher, I am a powerful, open, faithful, combative, spotless, faithful, fair person who loves writing and wants to share my knowledge and understanding with you.